zirconia ceramic

Mascera offers custom production for zirconia ceramic rings, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic rings can be machined with diamond machining tools only. The ceramic rings are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia plungers are made of exteme hard zirconia ceramic (zirconia ceramic), have the characteristics of high strength, wear resistance, corrosion resistance, and good toughness, making them more durable than metal coated plungers, the service life of zirconia plungers is 10 times longer than that of the metal plunger. At the same time, because of the excellent resistance to saltwater, oil, and some chemical solutions, zirconia plunges are widely applied in medical, food and beverage, petrochemical, and specialty chemical industries where fluid contamination is not permitted Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia ceramic (ZrO2, Zirconium Oxide) is an ideal techncial ceramic for structural parts, it has relatively high fracture toughness among all technical ceramics， overcoming the inherent brittleness of ceramics to some extent. Zirconia ceramic also has very high hardness, mechanical strength and wear resistance in room temperature and will increase the service life of workpiece greatly. , zirconia ceamic is widely applied for structural ceramic parts or wear resistant parts make ceramic valve components, ceramic utility blades, ceramic grinding media, ceramic pump plungers, ceramic bearings and so on. Any inquiry please email info@mascera-tec.com or call +86 13860446139

MASCERA Atomizing Nozzles are produced with the highest cast tolerances and are used in the molten metal atomizing process, as well as other casting departments for flow control. We offer precise and repeatable dimensional control, which ensures that each part will perform exceptionally to provide precise particle sizing and flow. Mascera is a reputable supplier for high quality zirconia ceramic nozzles, Welcome to contact us when you have demand, we will do our best to match your demands. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera is a professional supplier for technical ceramic parts, we provide custom manufacturing for alumina ceramics, zirconia ceramics, boron nitride ceramics, silicon nitride ceramics, silicon carbide ceramics, aluminum nitride ceramics and machinable glass ceramics. We produce varioous kinds of ceramic blades for utility knives or cutting machines. The ceramics blades are made of zirconia ceramic which has very high hardness and outstanding wear resistance, utting edge will remain much longer than steel blades. Custom size and design are also available to produce. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic sleeves / tubes, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic sleeves / tubes can be machined with diamond machining tools only. The ceramic sleeves / tubes are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia ceramic has higher fracture toughness than alumina ceramic, it also has high hardness, good wear resistance and high mechanical strength, it is widely applied for structural ceramic parts or wear resistant parts make ceramic valve components, ceramic utility blades, ceramic grinding media, ceramic pump plungers, ceramic bearings and so on. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic plates, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic plates can be machined with diamond machining tools only. The ceramic plates are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic discs, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic discs can be machined with diamond machining tools only. The ceramic discs are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139