Zirconia Ceramic

​DIN6325 ceramic dowel pins are made of zirconia ceramic (ZrO2 or Zirconium Oxide), which has ultra-high hardness, excellent wear resistance and mechanical strength. They are used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. Compared with steel pins, zirconia ceramic dowl pins are much more wear resistant and durable, having higher mechanical strength. Besides, zirconia ceramic dowel pins have good resistance to acids & alkalis, they can be used for applications where have strong corrosion.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Because of excellent properties in mechanical and chemical aspects, zirconia ceramic (zro2 / zirconium oxide) was found a good application as ceramic valve parts, such as ceramic valve balls, ceramic valve seats, ceramic valve liners, ceramic valve bodies. Zirconia ceramic valve parts have good durability, superior abrasion resistance and chemical inertness, they hardly react with most chemical media, The using of zirconia ceramic valve parts can effectively separate the corrosive fluid medium from the metal valve body, greatly improving the working life of valves. Currently, ceramic valve parts are widely used in flue gas desulfurization, chlor-alkali chemical industry, petrochemical industry, coal chemical industry, thermal power generation etc.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia ceramic bearings balls, also known as zirconium oxide bearings balls, are a type of high-performance ceramic ball used in bearings applications.
Compared to traditional steel balls, zirconia ceramic bearing balls have a number of advantages, including higher hardness, superior wear resistance, and excellent corrosion resistance. They are also non-magnetic and non-conductive, making them ideal for use in harsh or corrosive environments.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic rings, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic rings can be machined with diamond machining tools only. The ceramic rings are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia plungers are made of exteme hard zirconia ceramic (zirconia ceramic), have the characteristics of high strength, wear resistance, corrosion resistance, and good toughness, making them more durable than metal coated plungers, the service life of zirconia plungers is 10 times longer than that of the metal plunger. At the same time, because of the excellent resistance to saltwater, oil, and some chemical solutions, zirconia plunges are widely applied in medical, food and beverage, petrochemical, and specialty chemical industries where fluid contamination is not permitted

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia ceramic (ZrO2, Zirconium Oxide) is an ideal techncial ceramic for structural parts, it has relatively high fracture toughness among all technical ceramics， overcoming the inherent brittleness of ceramics to some extent. Zirconia ceramic also has very high hardness, mechanical strength and wear resistance in room temperature and will increase the service life of workpiece greatly. , zirconia ceamic is widely applied for structural ceramic parts or wear resistant parts make ceramic valve components, ceramic utility blades, ceramic grinding media, ceramic pump plungers, ceramic bearings and so on.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

MASCERA Atomizing Nozzles are produced with the highest cast tolerances and are used in the molten metal atomizing process, as well as other casting departments for flow control. We offer precise and repeatable dimensional control, which ensures that each part will perform exceptionally to provide precise particle sizing and flow.
Mascera is a reputable supplier for high quality zirconia ceramic nozzles, Welcome to contact us when you have demand, we will do our best to match your demands.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic sleeves / tubes, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic sleeves / tubes can be machined with diamond machining tools only. The ceramic sleeves / tubes are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing.

Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic plates, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic plates can be machined with diamond machining tools only. The ceramic plates are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing.

Any inquiry please email info@mascera-tec.com or call +86 13860446139